Rope inspections

OSHA standards for rope inspections

Wire ropes undergo constant stress and wear through daily use. So, wire rope requires monthly inspection in accordance with this section to reduce the risk of failure and potential resulting injury or property damage. In addition, this section covers criteria to use in determining when to replace rope, and requires inspection of rope on equipment that has been idle for a month or more, before the rope and equipment can be returned to service.

 

OSHA 1910.179 Overhead & Gantry Cranes Regulations
The following excerpt is taken directly from OSHA 1910.179.*

Running rope inspection

A thorough inspection of all ropes shall be made at least once a month and a certification record which included the date of inspection, the signature of the person who performed the inspection and an identifier for the ropes which were inspected shall be kept on file where readily available to appointed personnel. Any deterioration, resulting in appreciable loss of original strength, shall be carefully observed and determination made as to whether further use of the rope would constitute a safety hazard. Some of the conditions that could result in an appreciable loss of strength are the following:

  • Reduction of rope diameter below nominal diameter due to loss of core support, internal or external corrosion, or wear of outside wires.
  • A number of broken outside wires and the degree of distribution or concentration of such broken wires.
  • Worn outside wires.
  • Corroded or broken wires at end connections.
  • Corroded, cracked, bent, worn, or improperly applied end connections.
  • Severe kinking, crushing, cutting, or unstranding.

Other ropes

All rope which has been idle for a period of a month or more due to shutdown or storage of a crane on which it is installed shall be given a thorough inspection before it is used. This inspection shall be for all types of deterioration and shall be performed by an appointed person whose approval shall be required for further use of the rope. A certification record shall be available for inspection which includes the date of inspection, the signature of the person who performed the inspection and an identifier for the rope which was inspected.

 

Wear and damage to wire rope can’t always be seen on the surface. Konecranes RopeQ Magnetic Rope Inspection pairs visual inspection with non-destructive testing to detect internal broken wires that may escape detection through traditional inspection methods.

 

 

 

*The foregoing OSHA regulations are not intended to be a comprehensive overview of all applicable regulations pertaining to the designated topic. State laws may mandate different safety and maintenance standards. Accordingly, please consult applicable state laws as well as original equipment manufacturer specifications for further guidance. The statements and descriptions contained herein constitute the opinion/recommendation of the seller and are not intended to create any express warranties. 

Learn more

Konecranes technician and customer with crane remote
Customer story
Konecranes Miami develops a niche market in the islands The business of delivering electricity to Caribbean customers is always on the move, as… One…
Celsa Steel Service in Sweden
Video
Celsa Steel Service AB, based in Halmstad, Sweden sells and processes reinforcement products to the construction industry. Ivan Ramsak, Maintenance Ma…