Smart Features for the automotive industry

Sway Control limits load swing by controlling the acceleration and deceleration of the bridge and trolley. It allows faster load handling and more precise positioning while reducing the risk of damage to the load, crane and surrounding area.

Active Sway Control automatically stabilizes load movements during crane operations. Based on the continual measurement of the rope angle, the operator’s speed commands are fine-tuned to stabilize load movement in both trolley and bridge travel. Minimal load sway throughout the duty cycle improves operational safety, load cycle times, ease of crane operation, and produces less wear on crane components.

Shock Load Prevention slows the hoist for smoother movement if the load is picked up too fast. This prevents shocks to the load and crane, helping extend the life of the steel structure and its mechanical components.

Snag Prevention stops crane movement if the hook, sling or load accidentally catches on something. This feature helps prevent damage to the load, crane and surrounding area.

Protected Areas defines certain zones that the crane cannot enter. This improves safety by reducing the risk of accidents and preventing collisions between the crane and other equipment.

Target Positioning brings the load from home position to a predefined target position at the push of a single button. This simple movement increases safety and greatly reduces duty cycle times especially with predictable and repetitive work cycles.

Hook Centering eliminates side pull during lifting by positioning the bridge and trolley directly over the load. This reduces wear and tear on components, and gives you faster duty cycle times and easier operation.