Overhead crane cab regulations

Location key for crane cabs

An open cab on the crane or enclosed insulated, air conditioned cab should be located in the best place for maximum visibility. OSHA also lays out specific requirements for clearance, lighting and fire safety. 

 

OSHA 1910.179 Overhead & Gantry Cranes Regulations

The following excerpt is taken directly from OSHA 1910.179*

Cab location

  • The general arrangement of the cab and the location of control and protective equipment shall be such that all operating handles are within convenient reach of the operator when facing the area to be served by the load hook, or while facing the direction of travel of the cab. The arrangements shall allow the operator a full view of the load hook in all positions.
  • The cab shall be located to afford a minimum of 3 inches clearance from all fixed structures within its area of possible movement.

Access to crane

  • Access to the cab and/or bridge walkway shall be by a conveniently placed fixed ladder, stairs, or platform requiring no step over any gap exceeding 12 inches. Fixed ladders shall be in conformance with the American National Standard Safety Code for Fixed Ladders, ANSI A14.3-1956.

Fire extinguisher

  • Carbon tetrachloride extinguishers shall not be used.

Lighting

  • Light in the cab shall be sufficient to enable the operator to see clearly enough to perform his work.

If your current cab isn't meeting these standards - a modernization from Konecranes can provide you with a cab that can help increase safety with better sight lines and ergonomics and bring you into compliance. 

 

 

*The foregoing OSHA regulations are not intended to be a comprehensive overview of all applicable regulations pertaining to the designated topic. State laws may mandate different safety and maintenance standards. Accordingly, please consult applicable state laws as well as original equipment manufacturer specifications for further guidance. The statements and descriptions contained herein constitute the opinion/recommendation of the seller and are not intended to create any express warranties. 

Learn more

Overhead crane with operator cab
Expert article
For facilities seeking ways to reduce power consumption and long-term operating costs, a potential source of savings can be found by upgrading crane……
Konecranes CheckApp for Daily Inspections
Video
Konecranes CheckApp for Daily Inspections has been designed to help crane users quickly and easily record their findings when performing pre-shift…
Konecranes CheckApp for Daily Inspections on mobile
Video
Did you know that daily inspections are a statutory requirement in many countries? This video shows how a daily or pre-shift crane inspection can be p…
Konecranes Slings and Accessories Inspection
Video
The Slings and Accessories Inspection checks non-maintainable load lifting attachments and accessories that are attached to the crane hook during… The…